Cerakote V-Series is a ceramic liquid coating that can withstand temps up to 1,800 degrees when fully cured. We first media blast your part first to remove rust and coatings then bake for 30 minutes to an hour in our oven at 500 degrees to outgas any impurities. After your part has cooled down to room temperature we spray 3 coats of Cerakote V-Series using a spray gun then cure your part for 1 hour at 500 degrees. Believe it or not this is just the initial cure! Full cure is only obtained after your part is reinstalled on the vehicle and run up to operating temps.